OEM Fence Lever For Ridgid TS3650 and TS3660 Replacement For Part TH101904

Description

Fence Lever For Ridgid TS3650 and TS3660 Replacement For Part TH101904
This is for the
FENCE LEVER
ONLY.
Please Note: OUR FENCE LEVER IS AN AUTHENTIC OEM RIDGID LEVER AND IS NOT 3-D PRINTER MANUFACTURED. IT WAS REDESIGNED BY RIDGID.
PRODUCT DESCRIPTION If you have a Ridgid Construction Grade Table Saw TS3650 or TS3660, or other models listed below with a Broken Fence Lever you have probably been told that there is NO REPLACEMENT. I searched and searched all over the Internet looking for one that would work on my nice table saw that was rendered useless without this part for my Fence. My Ridgid Table Saw was Model TS3650 but the seal so work on the TS3660 or the other models listed below. Although it took some doing I found the part and now I am making these available for those of you who were in the same boat I was in.
It is an easy install / replacement that anyone can do. It took me about 7 minutes tops and then I had a working unit again. When changing this part there is a nut at the end of the fence. Simply count the number of turns you have to turn to take the existing one off and after changing this part turn the same number of turns to tighten that nut and you should be good. You see sometimes these companies tell you parts are "obsolete" when they know other parts will work. This is a perfect fitment. The flat part of the lever is a little narrower that the original one that was on my TS3650 because they changed that part of the design but the actual fitment of the lever in the holder will be the same. These worked perfectly in my TS3650 that you see in the photos. Ridgid realized that the original levers were apparently breaking too easy and redesigned it to make it stronger to use on a subsequent table saw fence. These will only be Guaranteed to FIT as a Replacement FENCE LEVER for the Ridgid TS3650 or TS3660 Table Saw Fence.
Prior to me finding out their secret, I was basically told there was no part available to fix my fence and that the best thing to do is buy a new table saw. ( These companies want you to have to buy new more expensive equipment so they "obsolete" parts so you cannot fix them. ) These Fence Levers are Known to Fit the Following Ridgid Table Saw Models: TS2400-1 TS3650 TS3660
So don't be left out in the cold: If you have these models listed in this Item Description these Levers will put your table saw back in business without the need to buy an expensive new table saw.
If you are buying from outside the U.S.A. and using the Global Shipping Program to obtain your part, please know that we charge .95 for U.S.A. Shipping. Anything above that, if you are buying from outside the U.S.A. is not charged nor collected by us and we are not responsible for those ad on costs that occur by that program.  If you live outside the U.S.A be prepared to pay more for shipping through that Program. They do a good job but there are costs involved that are charged for.
(DISCLAIMER: Pictures of the table saw and any other item other than the Fence Lever itself in this picture are for reference only and not a part of this offering.) THIS PART IS ACTUALLY MANUFACTURED FOR ME WHEN I ORDER IN LARGE LOTS AND TAKES AT LEAST 4-6 WEEKS FOR ME TO GET SOMETIMES LONGER. I DO NOT KNOW HOW LONG THEY WILL BE AVAILABLE TO HAVE THEM TO BE MANUFACTURED.